TINTORETTO

The Tintoretto was not designed to be cheaper: all components are the same as in the bigger models, only the size is smaller to fit into smaller size rooms, from 15sqm (150sqft) to 50sqm (500sqft).

The two panels size is 0.58m (23″) wide and 1.44m (57″) height, with a total of 0.6sqm (6.5sqft) woofer surface on the two channels and weight of 85Kg (189lb) per channel.

High sensitivity of 93dB makes possible to use virtually any amplifier.

It is possible to upgrade Tintoretto to Tintoretto X or Tintoretto XX buying the 2 black acrylic passive external crossovers, just like Botticelli.

BOTTICELLI

The best is in the middle (“In medio stat virtus” the Romans used to say) so in normal size rooms, from 25sqm (250sqft) to 100sqm (1000sqft) we recommend our BOTTICELLI model.

The two panels size is quite classical: 0.64m (25″) wide and 1.77m (70″) height, with a total of 0.9sqm (10sqft) woofer surface on the two channels and weight of 115Kg (255lb) per channel.

High sensitivity of 94dB makes possible to use virtually any amplifier.

It is possible to upgrade to Botticelli X or XX buying the two external passive crossovers using an exclusive topology and bigger/higher quality components, connecting cables between speaker and crossover are included. X external crossovers are 430x330x130mm each weight 25Kg including the transparent acrylic base, XX external crossovers are 680x450x130mm each weight 45Kg including the transparent acrylic base. XX version is using even bigger and higher quality components and connecting cables compared to X version and the result is higher resolution and transparency, it is like upgradind the speakers by one or two levels.

CARAVAGGIO

Our CARAVAGGIO model is very exclusive and is made on request only. It is a 4 ways design, 1 more compared to smaller models (ribbon- planar woofer, NEW ribbon midrange, ribbon tweeter and ribbon super-tweeter) on one panel per channel. Its width is 0.69m (27″) with a total height of 2.03m (80″), a weight of 150Kg (333lb) per channel excluding crossovers and a woofer surface of more than 1 sqm (11sqft) on the two channels. It comes with 2 acrylic external passive crossovers using exclusive topology, connecting cables between speaker and crossover are included. These standard crossovers have dimensions of 510x330x130mm weight 30Kg including acrylic transparent base and are using same quality components to X crossovers for Botticelli or Tintoretto, also XX quality is available on request with a size of 680x450x130mm weight 50Kg each. Difference is clearly audible with higher resolution and transparency, like upgrading the speakers by one or two levels.

Also a separate dedicated subwoofer panel (one each channel) is available and it is recommended only in very big rooms from 80sqm (800sqft).

High sensitivity of 94dB makes possible to use virtually any amplifier.

It is recommended for rooms of 40sqm (400sqft) to 120sqm (1200sqft).

RAFFAELLO

Our top of the line RAFFAELLO model is very exclusive and is made on request only. It is a symmetrical design with double midtweeter and double woofer at the sides of the central supertweer. This is making a total width of 0.85m (33.5″) each channel with a total height of 2.03m (80″), a weight of 180Kg (400lb) per channel excluding crossovers and a total woofer surface of about 1.7 sqm (19sqft) on the two channels.

The symmetrical design brings better interaction with room walls and better imaging.

Also double transducers allow higher dynamics and resolution.

It is possible to add subwoofer panels, same as CARAVAGGIO.

It comes with 2 separate acrylic passive crossovers using an exclusive topology, connecting cables between crossover and speaker are included. These are XX quality as standard, dimensions 680x450x130mm weight 50Kg each including transparent acrylic base.

High sensitivity of up to 98dB makes possible to use virtually any amplifier.

It is recommended for rooms bigger than 50sqm (550sqft) and wider than 5.5m (18ft).

Click below to learn more about Alsyvox

Alsyvox visits The Absolute Sound